Anti-Bacteria Roll Vinyl 2024 Factory Wholesale Low Formaldehyde Emission for Healthcare

• Customization: Available
• After-sales Service: Provide Technical Guidance for Construction
• Warranty: 1 Year
• Material: PVC
• Style: Modern Sport
• Function: Anti-Slip, Moisture Proof, Rot Proof, Wear-Resistant, Fireproof
• Thickness: 4.5mm
• Lead Hardness: Elastic
• Surface Treatment: Gemline
• Pattern: Elastic
• Color: Red, Blue, Green, Grey, Orange
• State: Coil
• Usage: Sports
• Transport Package: Roll up Tray
• Specification: 4.5mm*1.8m*20m
• Trademark: Ogilvy Season
• Origin: Guangdong
• HS Code: 391809000
• Production Capacity: 100000 Square Meters Per Year

Product Description

PVC sports floor
PVC sports floor is the use of polyvinyl chloride material specifically for the development of a sports floor for sports venues, Specifically, polyvinyl chloride and its copolymer resin are the main raw materials, adding auxiliaries such as fillers, plasticizers, stabilizers, colorants and so on, and being produced on a sheet-like continuous substrate by a coating process or by a pressure, extrusion or squeeze process. It is generally made up of multi layer organization, generally have wear-resisting layer (contain UV treatment), glass fiber layer, elastic foaming layer, basic unit, etc. PVC sports floor is widely used,  the international competitions are designated to use PVC sports floor, visible this PVC sports floor market prospects are very broad.
name: PVC sports floor
Gauge: 3.5mm-9.0mm
Material: PVC material
Movement: The application is very wide




PVC sports floor is widely used in various sports venues, such as: badminton, table tennis, Competition and training venues for volleyball, tennis, basketball, handball, indoor football, multifunctional venues, various kinds of gyms, dance rooms, schools, union activity rooms, multifunctional halls, amusement parks, kindergartens, sports goods stores, offices, hotels, hospitals, etc


Installation of PVC sports flooring
I. Mobile installation: The floor and the floor are bonded into one with a special attached cable provided by the manufacturer. The floor and floor surface are not bonded, and the PVC sports floor can be rolled up or removed at will to facilitate movement. II. Fixed installation: 1. Semi-fixed: special double-sided tape, between the floor and the floor is bonded into one with special double-side tape bands provided by the manufacturer. At the same time, the floor is also attached to the ground, which can effectively prevent the floor from moving due to vigorous movements and cracking, and also facilitate the entire site to be moved when necessary. 2. Local bonding: on the ground to the edge of the floor as a benchmark to brush 20cm glue bonding. 3. Full adhesion: Apply all adhesion to the floor to be laid. [Basic level requirements]: the construction ground base must be clean, lasting clean, level up degree high, and no cracks. The moisture content of the concrete floor cannot exceed 2.5%. The moisture content of the plaster surface shall not exceed 0.5%. Before the floor was laid. After the floor is dusted, PVC sports floor can be laid. If the original ground uneven can also be constructed about 2mm of self-leveling. If the non-absorbent ground is such as mineral ground, stone, tile, etc., it can be laid directly. [Note]: If it is the basement and other wet ground, the floor must be done to isolate water proof layer. [Installation Steps]: 1. The flooring must be flat and clean. 2. Before the laying of the PVC sports floor, it must be spread in advance to lay the ground for more than 24 hours, and the site temperature should not be lower than 15C. After the floor is restored, the two ends should be left 5cm more when cutting. Before gluing, roll up the unfolded floor about half in the opposite direction and apply the glue - starting in the middle - with a teeth-laced shaving knife. 3. Arrange the flooring in the order of numbering, align and merge, and pay attention to align the ground line during the laying process. 4. Open two adjacent floors along the seam, place the manufacturer-supplied specialty connecting tape on the lower side of the seam. Brush the surface of the connecting tape. First, attach one of the plates to half of the connective tape, then attach the other half to the remaining connecting tape, tighten the gap. 5. It is recommended to use water-soluble glue that is harmless to human body for construction. When flooring is applied, use softwood blocks to squeeze the floor surface from the center to both ends to flatten it without bubbles, and roll to flatten the floor most thoroughly. 6. After the floor is glued, the groove is opened and soldered. After the solder is soldered, the solder wire should be shovelled flat.